Straightened the Cuts

I had second sessions later this afternoon and spent half an hour to straighten those rough cuts that the nibbler left on the forward edge of the main ribs.

Here's a before-after shot of how the cut looked before and after I trimmed it with the Cut & Polish and the Scotchbrite Wheel.



Another thing I noticed when dealing with the main ribs is the lack of distinction between the -L and the -R version of the ribs. The only way to quickly tell which one is which once the stickers are gone are the location of two holes in the web.

One is in the forward part of the rib:



And one is in the aft area:


So, in case you removed the stickers and thought the ribs were all the same and found out later that you have no clue which is which, look closely at these photos. The left rib in the picture is the -L and the right one is the -R version.